condition codes meaning in Chinese
条件码
状况码
Examples
- Condition code register
条件码寄存器 - To implement dynamic binary translation effectively , several optimized methods come up in this thesis : efla algorithm to enhance the efficiency of emulating the condition code of the source platform on target platform ; two algorithms to handle the active and passive exception in application level ; and a translation - guided algorithm for register allocation
针对动态二进制翻译,本文提出了若干种优化方案:提高在目标机器上模拟源机器标志位效率的efla算法;处理应用级主动异常和被动异常的两个算法;翻译制导的寄存器优化算法。 - The specific route is as follows : firstly , the output signals from the multipath sensor are nornalized , i . e . , all sensor signals ( including the analog data ) are transformed into multipath square wave pulse signals to form multipath parallel condition codes . these codes are treated as input signals for dac to obtain a series of dispersed analog signals for output as input signals for the vco . finally , a high frequency modulation signal is conducted at the vco ' s output
具体技术路线如下：先将由多路传感器输出的信号进行归一化处理，即将所有传感器信号(包括模拟量)转换成多路方波脉冲信号，以形成多位并行信号的状态码，将其作为dac的数据输入信号，从而得到一系列离散的模拟信号输出，作为vco的输入信号，最终在vco输出端形成高频的调制信号。